The processing of 1197 Parallel Flow Microchannel Aluminum Flat Tube is the most difficult in aluminum extrusion processing. Because the extrusion ratio of micro-channel aluminum flat tube is too large, the aluminum material used is very soft and the alloy content is very small. The brand is generally 1050, 1100, 3102 and 1197. 1197 Parallel Flow Microchannel Aluminum Flat Tube is mainly used for t...

At present, transport vehicles, construction machinery and other heat exchanger using evaporator and condenser, with copper single hole flat tube, its shortcomings are: 1, single hole heat exchange effect is poor; 2, copper resources are tight, heavy weight; 3, low compressive strength. Aluminum precision tubing for heat exchange , which is used for evaporator and condenser and belongs to the formi...

Micro aluminum extrusion is made of several channels that increase the heat transfer through a higher surface per volume ratio. Specifications of Micro aluminum extrusion : The Micro aluminum extrusion produced by our company has a maximum width of 230mm-240mm. Alloy: 1100,1050,1060,1070,1197,3003,3102,3026, etc. 2) Temper: O/F/H111/H112 3) width: 6mm-240mm 4) Height: Above 0.8mm 5) Wall thickness:...

9153 is a special high quality alloy, generally meet the requirements of the use of relatively high customers, ordinary Aluminum multi channel pipe is generally can reach 500 hours of neutral salt spray test, and 9153 alloy can reach 1500 hours of neutral salt spray test. 9153 Aluminum multi channel pipe is mainly used for the production of heat exchangers. Due to its high corrosion-resistance good...

Precision aluminum tubing are unique tubes developed with highly refined manufacturing quality. With their large internal surface area, they can achieve more efficient heat transfer and hence are widely used in highly effective heat exchangers. The Specifications of Precision aluminum tubing are as follows: 1)Alloy :1060 1050 3003 3102 2) Temper: OlF/H111/H112 3) width: 6mm-240mm 4) Height: Above 0...